FAQ
1. Which time synchronization methods are supported by Mid-360S?
2. Which scanning mode does Mid-360S use?
3. Is Mid-360S designed with a built-in IMU? What is the model?
4. Are there any requirements on the input voltage for Mid-360S?
5. Can Mid-360S use the SDK and ROS drivers of previous Livox products?
6. Does Mid-360S support operation when multiple LiDAR sensors are transmitting at the same frequency band nearby?
7. What are the point cloud data formats supported by Mid-360S?
8. Can I attach a hood to Mid-360S?
9. Can I use Mid-360S in direct sunlight?
10. Can Mid-360S use the official Livox open-source mapping algorithm?
11. Can Mid-360S use the standard Livox Converter 2.0 and other cables of previous products?
12. Can the point cloud data output from Mid-360S be converted into the “.las” or “.pcd” format?
13. Does Mid-360S come with power supply and communication cables?
14. What is the angular resolution of Mid-360S output point cloud?
15. What is the operating noise level of Mid-360S?
16. What is the operation temperature range of Mid-360S? Is there any risk when used outdoors during summer?
17. What is the data bandwidth of Mid-360S point cloud?
18. What does Mid-360S point cloud data contain?
19. How much computing power is required for Mid-360S, and what processor is recommended?
20. Does noise occur on the point cloud when using Mid-360S in rainy, foggy or dusty environment? Is there a way to filter out the point cloud noise?
21. What is the Mean Time To Failures (MTTF) of Mid-360S?
22. What EMC standards has Mid-360S passed?
23. What is the difference between Mid-360S and Mid-360?
24. Can Mid-360S seamlessly replace Mid-360?
25. What is the noise level of Mid-360S? Under what test conditions was it measured?
26. What application scenarios can Mid-360S be used for?
27. What are the installation requirements for Mid-360S?
28. How is the vibration resistance of Mid-360S?
29. How can I purchase Mid-360S in bulk?
30. Does Mid-360S provide global warranty?
31. Does Mid-360S support customization?